欢迎来到聊城福瑞营物资有限公司网站!
公司简介 联系我们
微信扫一扫
联系方式
服务热线:

服务热线:

131-6540-1858

您现在所在的位置: 首页 - 新闻中心 > 常见问题 >

高硬度耐磨板的切削质量应该注意哪些?

所属分类:常见问题 发布时间:2021-05-17 来源:https://www.lcnaimoban.com/ 浏览量:

1.切割喷嘴应根据高硬度nm360耐磨板的厚度选择,并调整切割直线度和切割速度,以获得良好的切割质量。
1. The cutting nozzle should be selected according to the thickness of high hardness NM360 wear-resistant plate, and the cutting straightness and cutting speed should be adjusted to obtain good cutting quality.
2.切割高硬度的nm360耐磨板厚板。切割喷嘴应垂直于工件表面。移动切割喷嘴前,请等待整个截面被切割。当到达切割终点时,切割速度应减慢,但不要太慢。
2. Cutting NM360 wear resistant plate with high hardness. The cutting nozzle should be perpendicular to the workpiece surface. Please wait for the whole section to be cut before moving the cutting nozzle. When the cutting end is reached, the cutting speed should be slowed down, but not too slow.
3.切削参数应根据高硬度nm360耐磨板的厚度进行调整,包括切削喷嘴型号、气体压力和切削速度。因为如果参数不正确,最终的切割质量会受到影响。
3. The cutting parameters should be adjusted according to the thickness of high hardness NM360 wear plate, including the type of cutting nozzle, gas pressure and cutting speed. Because if the parameters are not correct, the final cutting quality will be affected.
4.切割高硬度nm360耐磨板前,应清洁表面,去除灰尘、污垢和油脂,以免影响切割质量。
4. Before cutting high hardness NM360 wear-resistant plate, the surface should be cleaned to remove dust, dirt and grease, so as not to affect the cutting quality.
NM500耐磨板
5.割炬移动时要匀速移动,这样比较合适。
5. When the cutting torch moves, it should move at a constant speed, which is more appropriate.
6.如果裁片的大小不一样,一般先把小的裁开,再把大的裁开。
6. If the size of the cut piece is different, generally cut the small one first and then the large one.
7.如果切割直杆,每个切割喷嘴的火焰强度应该一致,否则会有问题。
7. If cutting straight rod, the flame intensity of each cutting nozzle should be consistent, otherwise there will be problems.
8.在切割过程中,随时观察和注意切割情况,确保不间断连续切割。
8. In the process of cutting, observe and pay attention to the cutting situation at any time to ensure continuous cutting.
9.切割后,检查高硬度nm360耐磨钢板的切割表面是否有任何问题或缺陷。
9. After cutting, check the cutting surface of high hardness NM360 wear-resistant steel plate for any problems or defects.
10.工件切割后,应在检查没有问题后进行识别。
10. After the workpiece is cut, it should be identified after checking that there is no problem.
耐磨钢板厂家会提供专业的切割技术。我们提供需要加工的尺寸和结构,厂家会加工我们需要的产品。切割时也要注意安全,做好附近的除尘工作,避免高温引起粉尘爆炸的可能性。最终很容易让我们受伤。保护环境的方方面面对我们来说非常重要。严格按照要求操作很重要。
Wear resistant steel plate manufacturers will provide professional cutting technology. We provide the size and structure to be processed, and the manufacturer will process the products we need. When cutting, we should pay attention to safety and do a good job of dust removal nearby to avoid the possibility of dust explosion caused by high temperature. It's easy to get hurt in the end. All aspects of environmental protection are very important to us. It is important to operate strictly according to the requirements.
热门产品 / HOT PRODUCT
新闻推荐 / NEWS RECOMMEND ATIONS