欢迎来到聊城福瑞营物资有限公司网站!
公司简介 联系我们
微信扫一扫
联系方式
服务热线:

服务热线:

131-6540-1858

您现在所在的位置: 首页 - 新闻中心 > 公司动态 >

Mn13耐磨板的剪切应该注意什么?

所属分类:公司动态 发布时间:2021-04-29 来源:https://www.lcnaimoban.com/ 浏览量:

首先,如果通过使用火焰切割设备对Mn13耐磨板进行火焰切割,实际上就是进行高温热变形切割,这种情况下要想得到较好的切割质量,就必须有专门的切割设备和熟练的技术人员才可以。
First of all, if we use flame cutting equipment to cut Mn13 wear-resistant plate, it is actually high temperature thermal deformation cutting. In this case, in order to get better cutting quality, we must have special cutting equipment and skilled technicians.
其次,激光切割是平时用的较多的一种切割工艺,它在Mn13耐磨板切割方面的效果怎么样的?通过切割设备对激光束进行聚合,使Mn13耐磨板能够达到切割效果,但设备造价较高,技术成本太大,因此使用不多。
Mn13耐磨板
Secondly, laser cutting is usually used more of a cutting process, it in the Mn13 wear-resistant plate cutting effect? The laser beam is polymerized by the cutting equipment, so that the Mn13 wear-resistant plate can achieve the cutting effect, but the equipment cost is high, the technical cost is too large, so it is not used much.
其实比较受Mn13耐磨板加工企业青睐的反而是线切割,就是采用电火花对耐力板进行切割,但是它又不同于传统的线切割,而是在原有电火花的穿孔成型基础上进行了改良,并且由于设备造价便宜、使用简单,所以才会受到了企业的广泛运用。
In fact, Mn13 wear-resistant plate processing enterprises prefer wire cutting, that is, using EDM to cut the endurance plate, but it is different from the traditional wire cutting, but it is improved on the basis of the original EDM perforation molding, and because of the convenient cost and simple use of the equipment, it will be widely used by enterprises.
除此之外,剪板机切割也是一种耐力板剪切方法,利用剪板机对薄片Mn13耐磨板直接使用刀片进行切割,这种方法虽然简单,但是局限性较大,因此不适合所有企业使用。
In addition, the shearing machine cutting is also a kind of endurance plate cutting method, using the shearing machine to directly use the blade to cut the Mn13 wear-resistant plate. Although this method is simple, it has great limitations, so it is not suitable for all enterprises.
热门产品 / HOT PRODUCT
新闻推荐 / NEWS RECOMMEND ATIONS