欢迎来到聊城福瑞营物资有限公司网站!
公司简介 联系我们
微信扫一扫
联系方式
服务热线:

服务热线:

131-6540-1858

您现在所在的位置: 首页 - 新闻中心 > 公司动态 >

瑞典进口耐磨板低速切割方式

所属分类:公司动态 发布时间:2021-04-30 来源:https://www.lcnaimoban.com/ 浏览量:

特别说明:将预热和低速两种火焰切割方法结合使用,德州瑞典进口耐磨板,可以进一步降低切割裂纹的出现几率。
Special note: the combination of preheating and low speed flame cutting can further reduce the probability of cutting cracks.
切割后缓冷要求:无论对切割不见是否预热,钢板切割后的缓冷都会有效降低切割裂纹的风险。如果切割后将其带有温热的不见进行堆放,使用隔热毯将其覆盖,也可以实现缓冷,缓冷要求冷却到室温。
Requirements for slow cooling after cutting: no matter whether the steel plate is preheated or not, the slow cooling after cutting will effectively reduce the risk of cutting cracks. If it is piled up after cutting and covered with thermal insulation blanket, slow cooling can also be realized. Slow cooling requires cooling to room temperature.
切割后加热要求:对于耐磨钢板的切割,切割后立即采取加热(低温回火),也是预防切割裂纹的有效方法和措施。钢板切厚通过低温回火处理,可以有效消除切割参与应力(低温回火工艺;保温时间安5min/mm)
Mn13耐磨板
Heating requirements after cutting: for the cutting of wear-resistant steel plate, heating immediately after cutting (low temperature tempering) is also an effective method and measure to prevent cutting cracks. Low temperature tempering can effectively eliminate the stress involved in cutting (low temperature tempering process; Holding time (5min / mm)
对于切割后加热的方法,瑞典进口耐磨板价格,也采用燃烧枪、电子加热毯和节哀热炉的加热方式进行切割后的加热。
For the heating method after cutting, the price of wear-resistant plate imported from Sweden also adopts the heating method of combustion gun, electronic heating blanket and saving furnace to heat after cutting.
耐磨板应用建筑机械:水泥推料机齿板,混凝土搅拌楼、搅拌机衬板,除尘器衬板,制砖机模具板。推荐使用材质为NM360/400厚度10-30mm的耐磨钢板。
Application of wear-resistant plate construction machinery: Cement pusher tooth plate, concrete mixing plant, mixer lining plate, dust collector lining plate, brick machine mold plate. NM360 / 400 wear resistant steel plate with thickness of 10-30mm is recommended.
耐磨钢板还可应用在砂磨机筒体、叶片,各种货场、码头机械那么部件,轴承结构件,铁路车轮结构件,轧辊等。
The wear-resistant steel plate can also be used in the barrel and blade of sand mill, various mechanical parts of freight yard and wharf, bearing structural parts, railway wheel structural parts, roll, etc.
耐磨钢板合金耐磨层和基板之间是冶金结合。通过专用设备,采用自动焊接工艺,将高硬度自保护合金焊丝均匀地焊接在基板上,瑞典进口耐磨板加工,复合层数一层至两层以至多层,复合过程中由于合金收缩比不同,出现均匀横向裂纹,这是耐磨钢板的显著特点。
The alloy wear-resistant layer of wear-resistant steel plate is metallurgically bonded with the substrate. Through the special equipment and automatic welding process, the high hardness self-protection alloy welding wire is evenly welded on the base plate, and the wear-resistant plate imported from Sweden is processed. The number of composite layers ranges from one to two or even more. Due to the different alloy shrinkage ratio, uniform transverse cracks appear in the composite process, which is the remarkable feature of wear-resistant steel plate.
本文的精彩内容由Mn13耐磨板提供的精彩内容分享,更多的精彩内容请点击进入我们的网站:https://www.lcnaimoban.com,我们会有更多的精彩内容等您查看,欢迎大家来电咨询.
The wonderful content of this article is shared by the wonderful content provided by Mn13 wear resistant plate. For more wonderful content, please click to enter our website: https://www.lcnaimoban.com , we will have more wonderful content waiting for you to check, welcome to inquire
热门产品 / HOT PRODUCT
新闻推荐 / NEWS RECOMMEND ATIONS