欢迎来到聊城福瑞营物资有限公司网站!
公司简介 联系我们
微信扫一扫
联系方式
服务热线:

服务热线:

131-6540-1858

您现在所在的位置: 首页 - 新闻中心 > 公司动态 >

对于高性能的钢板的要求为什么越来越高?

所属分类:公司动态 发布时间:2021-05-24 来源:https://www.lcnaimoban.com/ 浏览量:

应用更薄、更轻但机械强度更高的钢板降低了移动负荷,可实现节能的目的。使用更轻薄的钢板时在制造时还能减少焊材的使用,并缩短焊接的时间。
The application of thinner and lighter steel plate with higher mechanical strength can reduce the moving load and realize the purpose of energy saving. The use of thinner steel plates can also reduce the use of welding materials and shorten the welding time.
超重负载:
Overweight load:
起重设备和矿山机械通常体积庞大,超大的负荷要求更高的机械强度,但同时也要求钢板具备足够的厚度和耐磨损性。
Lifting equipment and mining machinery are usually bulky, super large load requires higher mechanical strength, but also requires that the steel plate has enough thickness and wear resistance.
安全性:
Safety:
经济、环保要求相当严格的场合安全标准也非常高,例如海上石油和天然气的生产。应用于这类场合的钢板不但要求具备机械强度、还要具备防止断裂的高韧性和安全性。
NM400耐磨板
Safety standards are also very high in places where economy and environmental protection are very strict, such as offshore oil and gas production. The steel plate used in this kind of situation not only requires mechanical strength, but also high toughness and safety to prevent fracture.
在世界各地,越来越多的大型机器设备,以及各类输送、装卸和起吊设备被投入使用。这类机器需要有效地移动超重负荷,并同时尽可能地降低自重。这对用于承载结构的钢板,特别是厚钢板,提出了更高的机械强度要求。
All over the world, more and more large machinery and equipment, as well as all kinds of conveying, loading and unloading and lifting equipment are put into use. This kind of machine needs to effectively move the overweight load, and at the same time reduce the self weight as much as possible. This puts forward higher mechanical strength requirements for steel plates used in load-bearing structures, especially for thick steel plates.
在用于制作大规模机加工工件时,如部分机械结构件,钢板厚度每增加一毫米都会造成机加工时间延长,加工成本剧增。
When it is used to make large-scale machining workpieces, such as some mechanical structure parts, each increase of steel plate thickness by one millimeter will cause the machining time to extend and the processing cost to increase sharply.
在对超高强度钢板特别敏感的应用中,例如海上油气钻井平台等,对安全性的要求相当高。因此,对所使用钢板性能的宽限度有着特别的要求。针对这种应用,迪林根钢铁公司经过特别开发,可以供应690MPa屈服强度级别、厚度高达210 毫米的改良钢板。
In the application which is especially sensitive to ultra-high strength steel plate, such as offshore oil and gas drilling platform, the safety requirement is quite high. Therefore, there are special requirements for the width of steel plate performance. For this application, Dillingen steel has been specially developed to supply improved steel plates of 690mpa yield strength grade up to 210mm in thickness.
福瑞营物资专注行业经营多年,专注于NM400耐磨板的生产及研究,欢迎大家点击我们的网站https://www.lcnaimoban.com进行咨询及了解,欢迎大家访问.
Furuiying materials has been engaged in the industry for many years, focusing on the production and research of nm400 wear-resistant plate. Welcome to our website https://www.lcnaimoban.com For consultation and understanding, welcome to visit
热门产品 / HOT PRODUCT
新闻推荐 / NEWS RECOMMEND ATIONS