欢迎来到聊城福瑞营物资有限公司网站!
公司简介 联系我们
微信扫一扫
联系方式
服务热线:

服务热线:

131-6540-1858

您现在所在的位置: 首页 - 新闻中心 > 公司动态 >

Mn13耐磨板塑造力有多强?

所属分类:公司动态 发布时间:2021-05-28 来源:https://www.lcnaimoban.com/ 浏览量:

强大的形体塑造能力:钢材质本是冷冰冰的代名词,而耐磨板的出现打破了人们对钢制材料的固有的印象。经过镂空处理,在钢板上勾勒出各种植物造型、简单的几何形状,立马显现出它优雅钢铁柔情的一面。
Strong shaping ability: steel quality is the pronoun of cold, and the appearance of wear-resistant plate has broken people's inherent impression of steel materials. After hollowing out, various plant shapes and simple geometric shapes are outlined on the steel plate, which immediately shows its elegant steel tenderness.
现在建筑所呈现出的咖啡色,正是耐磨钢遮阳屏在空气中腐蚀半年后自然形成的保护层颜色。其颜色均匀致密,令人感觉这并不是生了铁锈,而是建筑本身应有的颜色。在建筑的其它部位,从天花板上错落有致地悬吊着的松木圆环,到原色水磨石地面,再到清水混凝土旋转楼梯,都秉持着这种不雕饰、靠材料本身的纹理来装扮的原则,建筑的里里外外都与耐磨钢的色调与风格融为一体。
Now the brown color of the building is just the color of the protective layer naturally formed after the abrasion resistant steel sunshade is corroded in the air for half a year. Its color is even and dense, which makes people feel that it is not rust, but the color of the building itself. In other parts of the building, from the pine rings hanging on the ceiling, to the original terrazzo floor, and then to the fair faced concrete revolving stairs, they all adhere to the principle of decoration without carving and relying on the texture of the material itself. The interior and exterior of the building are integrated with the color and style of wear-resistant steel.
Mn13耐磨板
耐磨钢材质
Wear resistant steel material
1、铁素体不锈钢。含铬12%~30%。其耐蚀性、韧性和可焊性随含铬量的增加而提高 , 耐氯化物应力腐蚀性能优于其他种类不锈钢。
1. Ferritic stainless steel. The chromium content is 12% ~ 30%. Its corrosion resistance, toughness and weldability increase with the increase of chromium content, and its resistance to chloride stress corrosion is better than other kinds of stainless steel.
2、奥氏体不锈钢。含铬大于18%,还含有 8%左右的镍及少量钼、钛、氮等元素。综合性能好,可耐多种介质腐蚀。
2. Austenitic stainless steel. It contains more than 18% chromium, about 8% nickel and a small amount of molybdenum, titanium, nitrogen and other elements. It has good comprehensive performance and can resist corrosion in various media.
3、奥氏体 - 铁素体双相不锈钢。兼有奥氏体和铁素体不锈钢的优点,并具有超塑性。
3. Austenite ferrite duplex stainless steel. It has the advantages of austenitic and ferritic stainless steel, and has superplasticity.
4、马氏体不锈钢。强度高,但塑性和可焊性较差。
4. Martensitic stainless steel. High strength, but poor plasticity and weldability.
热门产品 / HOT PRODUCT
新闻推荐 / NEWS RECOMMEND ATIONS