欢迎来到聊城福瑞营物资有限公司网站!
公司简介 联系我们
微信扫一扫
联系方式
服务热线:

服务热线:

131-6540-1858

您现在所在的位置: 首页 - 新闻中心 > 行业动态 >

激光加热切割法带给nm400耐磨钢板的优势

所属分类:行业动态 发布时间:2021-05-17 来源:https://www.lcnaimoban.com/ 浏览量:

说到切割nm400耐磨钢,必须提到激光加热法。虽然有很多方法可以达到切割的目的,但是最推荐这种方法。主要原因是它采用激光加热切割钢板,比传统的钢板切割有更明显的优势,甚至缺点最终都会得到解决。
When it comes to cutting nm400 wear resistant steel, laser heating method must be mentioned. Although there are many ways to achieve the purpose of cutting, but the most recommended method. The main reason is that it uses laser heating to cut steel plate, which has more obvious advantages than traditional steel plate cutting, and even the disadvantages will be solved eventually.
激光加热钢板切割可以切割各种高硬度、高熔点的材料,对材料的种类没有很大限制,因为激光功率相对较高,可以满足不同材料的操作要求。作为自然界最快的速度,人们相信光速是不可战胜的,所以快速激光加热可以大大提高切割效率,减少对工件的热冲击。
Laser heating steel plate cutting can cut a variety of high hardness, high melting point materials, there is no great limit to the type of materials, because the laser power is relatively high, can meet the operation requirements of different materials. As the fastest speed in nature, people believe that the speed of light is invincible, so fast laser heating can greatly improve the cutting efficiency and reduce the thermal impact on the workpiece.
此外,即使工作条件不同,激光加热切割也不会受到阻碍,在大气、真空或其他环境下也不会影响激光切割。目前激光加热方式最大的问题是价格高,能量转化率低,但是随着技术的普及和进步,这已经不是问题了。
In addition, even if the working conditions are different, the laser heating cutting will not be hindered, and the laser cutting will not be affected in the atmosphere, vacuum or other environments. At present, the biggest problem of laser heating is the high price and low energy conversion rate, but with the popularization and progress of technology, this is no longer a problem.
NM400耐磨板
在钢板切割过程中,首先加工的是钢板,而不是钢板,因为钢板是在送料划线后才切割的。其实可以说是在准备钢板加工。
In the process of steel plate cutting, the first processing is steel plate, not steel plate, because the steel plate is cut after feeding and marking. In fact, it can be said that it is preparing for steel plate processing.
数控火焰切割和数控水切割是钢板切割中常用的切割方式,都属于数控切割。数控火焰切割成本不是很高,因为是一次加工,加工范围是3 mm到100 mm钢板。数控水切割以不变形为主,所以数控水切割成本较高。
Numerical control flame cutting and numerical control water cutting are commonly used in steel plate cutting, both belong to numerical control cutting. Numerical control flame cutting cost is not very high, because it is a processing, processing range is 3 mm to 100 mm steel plate. NC water cutting is mainly non deformation, so the cost of NC water cutting is high.
可以用几种激光切割机切割3mm厚的钢板,但是功率不同。比如使用YAG激光切割机,功率600瓦;二氧化碳激光切割机1000瓦;而光纤激光切割机是300瓦。
Several laser cutting machines can be used to Cut 3mm thick steel plate, but the power is different. For example, the use of YAG laser cutting machine, power 600 watts; CO2 laser cutting machine 1000W; The fiber laser cutting machine is 300 watts.
热门产品 / HOT PRODUCT
新闻推荐 / NEWS RECOMMEND ATIONS