欢迎来到聊城福瑞营物资有限公司网站!
公司简介 联系我们
微信扫一扫
联系方式
服务热线:

服务热线:

131-6540-1858

您现在所在的位置: 首页 - 新闻中心 > 行业动态 >

铲斗斗体耐磨钢板NM400、NM450、NM500 的使用

所属分类:行业动态 发布时间:2021-06-04 来源:https://www.lcnaimoban.com/ 浏览量:

土方工程用装载机铲斗斗体,特别是切削刃、侧切削刃和加强角板常用低碳低合金的高强度耐磨钢板焊接制成,如志琪实业专业加工各种耐磨钢板和零部件。耐磨钢板有:NM400、NM450、NM500;瑞典钢铁生产的HARDOX400、HARDOX450和HARDOX500悍达耐磨钢。。铲斗切削刀的形状分为四种,齿形的选择应考虑插入阻力、耐磨性和易于更换等因素。
The bucket body of loader for earthwork, especially the cutting edge, side cutting edge and reinforcing angle plate, is usually made of low-carbon low-alloy high-strength wear-resistant steel plate by welding. For example, Zhiqi industry specializes in processing various wear-resistant steel plates and parts. Wear resistant steel plate: nm400, nm450, nm500; Hardox400, hardox450 and hardox500 made by Swedish steel.. There are four shapes of bucket cutter. The selection of tooth shape should consider the factors of insertion resistance, wear resistance and easy replacement.
齿形分尖齿和钝齿,轮胎式装载机多采用尖形齿,而履带式装开机多采用钝形齿。斗齿数目视斗宽而定,斗齿距一般为150-300mm。斗齿结构分整体式和分体式两种,中小型装载机多采用整体式,而大型装载机由于作业条件差、斗齿磨损严重,常采用分体式。分体式斗齿分为基本齿2和齿尖1两部分损,磨后只需要更换齿尖。
The tooth shape is divided into sharp teeth and blunt teeth. The sharp teeth are mostly used in tire loaders, while the blunt teeth are mostly used in crawler loaders. The number of teeth depends on the width of the bucket, and the pitch is generally 150-300 mm. The bucket tooth structure is divided into integral type and split type. The integral type is mostly used in small and medium-sized loaders, while the split type is often used in large loaders due to poor working conditions and serious bucket tooth wear. The split bucket tooth is divided into two parts: basic tooth 2 and tooth tip 1. Only the tooth tip needs to be replaced after grinding.
NM450耐磨板
①加大斗
① Big fight
在标准机型配置的基础上,加大铲斗容量,以提高工作效率,满足比重较轻物料的铲装,如:煤炭等。
On the basis of standard machine configuration, increase the bucket capacity to improve work efficiency and meet the shovel loading of light weight materials, such as coal, etc.
②岩石王
② Rock King
主要针对装卸岩石工况,铲斗的斗臂板、支撑板斗进行了加强,并配备了高耐磨的副刀板、高耐磨精铸斗齿,从而提高了整个铲斗的使用寿命。
Aiming at the working condition of loading and unloading rock, the bucket arm plate and support plate are strengthened, and the bucket is equipped with high wear-resistant auxiliary knife plate and high wear-resistant precision casting bucket teeth, so as to improve the service life of the whole bucket.
③高卸黑金王
③ The king of black gold
满足货车日益增高的围栏高度,对于煤炭等比重较低的物料,即可满足高卸载,又可满足大装载量,大大提高工作效率。
To meet the increasing fence height of freight cars, for materials with low specific weight such as coal, it can meet the requirements of high unloading and large loading capacity, greatly improving the work efficiency.
④侧卸斗
④ Side dump bucket
针对场地狭小特别是隧道作业工况的工作装置,铲斗可单向侧翻,在隧道作业中可有效降低驾驶员的劳动强度。
In view of the narrow site, especially the working device of tunnel operation condition, the bucket can roll one-way, which can effectively reduce the labor intensity of the driver in tunnel operation.
⑤夹木叉
⑤ Wooden fork
主要用于林场及港口进行物料的搬运和装卸。
It is mainly used for transporting and loading materials in forest farms and ports.
⑥快换装置
⑥ Quick change device
主要针对工作场地中存在多种物料需要装卸的工作环境,驾驶员坐在驾驶室内即可对工作装置进行快速更换,使用方便、作业效率高,可更换的工作装置有:铲斗、夹木叉等。
It is mainly aimed at the working environment where a variety of materials need to be loaded and unloaded in the workplace. The driver can quickly replace the working device when sitting in the cab. It is convenient to use and has high operation efficiency. The replaceable working devices include bucket, wooden fork, etc.
⑦抓草斗
⑦ Grass grabbing bucket
主要应用于植物秸秆等抓取,具有开口大、压实紧、抓草效率高等特点。
It is mainly used for grabbing plant straw, with the characteristics of large opening, compact, high grabbing efficiency.
本文来自:NM450耐磨板更多的内容请点击:https://www.lcnaimoban.com我们将会为您提问的问题提供一个满意的服务,欢迎您的来电!
This article is from: nm450 wear resistant plate. For more information, please click: https://www.lcnaimoban.com We will provide a satisfactory service for your questions, welcome your call!
热门产品 / HOT PRODUCT
新闻推荐 / NEWS RECOMMEND ATIONS